USB Drive AutoRun.inf Tweaking

he autorun.inf file is the key to getting your USB drive (or CD-ROM drive, for that matter) to perform certain actions automatically and customize it’s look in My Computer. The purpose of this article is to shed some light on how this can be done.

Autorun.inf Structure

The autorun.inf file is a simple text file that can be opened up in any text editor (e.g. notepad). It always starts with a section header of:
[autorun]
Below this header is a list of different options. Each of these options is in the following format:
option=value
where
option is the option that you want to set and value is the value that you are setting for that option. So, if you had an option foo and you wanted to be set to bar, then you would enter:
foo=bar
(Do not use foo=bar in your autorun.inf file as it is only an example, not a real option setting.)
That is all there really is to understand about the structure of an autorun.inf file. On to doing some actual cool stuff with it!

Setting a Custom Icon

To create a custom icon for your USB drive, use the icon option. Set it to the name of the icon file.

Note: Since drive letters can change for USB drives, the file path is relative to the root of the drive. This means that if your USB drive is presently mounted on U: and your icon is located at U:\Icons\MyIcon.ico, then you would enter \Icons\MyIcon.ico for the value of this option.

For example, if you had an icon on the root of the USB drive called coffeecup.ico and you wanted this to be the icon that showed up for the USB drive, you would enter:
icon=coffeecup.ico
You are not limited to .ico files. If, for example, you have an executable with a nice icon, you can specify it as the icon file. For example:
icon=DCoTopen.exe

This is valid as long as DCoTopen.exe is available on the root of the USB drive.
Some files have more than one icon embedded in them. If this is the case, you can select which icon to use by specifing the index number after the file name. For example:
icon=iconlib.dll,2
This will use the second icon in the iconlib.dll file.

Naming Your USB Drive

If you would like your USB drive to display a specific name othr than the drive label created when it is formatted, use the label option. For example, if I wanted to call my drive DCoT Drive, I would add this to my autorun.inf file:
label=DCoT Drive
Now, when you look at your USB drive in My Computer, it will say DCoT Drive by the drive letter.

Setting AutoPlay Options

AutoPlay is a relatively new function of Windows XP. It allows you to set up what file is run when the USB drive is plugged into the computer and the message that you are prompted with. There are two options that work in conjunction with AutoPlay. The first is open. It specifies the program that you can run automatically with AutoPlay. So, if we wanted to run a program called DCoTopen.exe, you would add the this to your autorun.inf file:
open=DCoTopen.exe
The second option that we add is the message the user is prompted with. To set this, we use the action option. If we want the message to say DCoT Open Program, add the following to autorun.inf:
action=DCoT Open Program
Once you have added this information, AutoPlay should look something like this:

Adding Context Menu Items

There are certain basic options such as Open and Explore that are available when you right click on a USB drive. But, wouldn’t it be cool to add your own? You can using a couple of lines in the autorun.inf file.
The first thing that we need to do is create an action, give it a name, and a message. We do all of this using the shell\verb option. For example, let’s say that we would like to create an action called lost. It does not matter what the actin is called. It can be anything you want. We would also like to show the message Help! I’m Lost! in the context menu. We would simply add this line to autorun.inf:
shell\lost=Help! I'm Lost!
This will display Help! I’m Lost! in the context menu so that you can click on it. But, it doesn’t know what to do when you click on it. Tell the system by using shell\verb\command option. In our example, we want to run the Lost.exe application. Adding this line will do the trick:
shell\lost\command=Lost.exe
You can add as many of these line pairs as you want to make the context menu as custom as you want.

Changing Default Action

When you double click on your USB drive, by default it will open up the drive so that you can browse through the files. Often, it is advantageous to perform some other action when the user double clicks the USB drive icon. You do this with the shell option. If we wanted to run the Lost.exe program from the previous section automatically when we double clicked on the USB drive, we would add this line:
shell=lost
because lost is the name of the action that was specified in the earlier lines.

Viewing a File

If you wanted to view a file on your USB drive in the default application instead of running a program on the drive, you can substitute the open option for the shellexecute option. For example, if you wanted to open up a website called, oh, I don’t know, say http://www.DailyCupOfTech.com in the default web browser, you could user the following:
shellexecute=http://www.DailyCupOfTech.com
This will work for any file. This is the equivalent of using Start - Run… and then typing in a file name and clicking OK.

School’s Out, Time To Play!

That is about all there is to customizing the autorun.ing file. Now that you know what you are doing, it’s time to start playing! I have created the Autorun Dabbler’s Toolkit that you can play with.
Download the zip file and extract the contents to the root of an empty USB drive. You can now edit the autorun.inf and get it to do different things. Have fun!

source: here

How to make money online with LINKBUCKS using TPT (Traffic W) ?

What is Linkbucks?

Linkbucks is an advertising network that allows you to make money from sharing  your links by shortening them and spreading them all over the internet.

What are the requirements?

• basically all you need is internet access and you also need to be active online in order for you to make any cash
• you also need to have a way to get the money. you can use paypal or other methods that they have and be sure that you can get paid from any country.

You dont need

• to have a website
• to pay anything
• to write any code

Possible Tactics-(if you wish)

• you could start a blog and share links to your blog articles, you need to write about interesting stuff
• you could start a forum where people can discuss about something
• start a facebook group and get lots of visitors from that group
• put videos on youtube and put your links in the description

Getting started

1. all you have to do is sign up for FREE here
2. fill your details and that's it. after confirming your email address you can click the create links tab and start shortening links.
3. start spreading your links on the internet i write about how to do this in my other posts so look around

You should know that the rate of making money will be slow especially if the people clicking your links are are not from top countries (UK, USA etc) so try to get visitors from these countries to increase your earnings. That's all you need.

What is Traffic W?

Traffic W its a Traffic Exchange, just in a bot made off some Chinse people something.
Over 15 Million people use it everyday to earn big traffic to their sites.
You just need to run it and submit your sites you want Traffic too.
People also sell traffic from them to earn them som big cash everyday! Aslo hard used to exploit sites like& Linkbucks…
with Traffic W can you only add 4-6 links! Thats just bad for Traffic selling.

How to use Traffic W with Linkbucks ?

Instructions how to Earn Money with sharing links

First : Sign-Up for FREE here

• Login

• create links

• Paste your link in

• select clean all ages or 18+

• then select intermission ads these are the higer paying ads the ones that ask you to skip ad after a short time.

• then select what mini url you want to use there are like 15 to choose from any will do.

• then click create link and your done a short link will be generated and you can use that link and each time a person clicks it you will make money.

Second : Download the software (Traffic W)

How to use the software
This is just a brief discussion/ tutorial .

Whats the use of this bot?
- You use this to make other people click on ads ( making money online )
- You use this to get more traffic to your website
- you can use this in some website that has PTP link.

1. Open the program.

2. You'll see a button at the botton part of the software, you need to click on it

.

3. You'll see a box that will pop-up. You need to put your URL link there, in the box with (http://)

4. After you put your URL link there, you can now click the "ADD Link" button of the pop up box to be able to start the bot running.

5. You can see beside your link that there is a loading icon (that's the number of views you'll accumulate, using the bot)

6. In line with your URL link, you'll see some chinese button.I will show you the important ones


Note: The number of your link depends on the speed of the internet you have ( next pop-up box tell you that you can't add other links ).

You don't need to use proxy or anything. You just need your link, and let it run.

Enjoy!  

Payment proof:

 

What is virus ?

    In computers, a virus is a program or programming code that replicates by being copied or initiating its copying to another program, computer boot sector or document. Viruses can be transmitted as attachments to an e-mail note or in a downloaded file, or be present on a diskette or CD. The immediate source of the e-mail note, downloaded file, or diskette you've received is usually unaware that it contains a virus. Some viruses wreak their effect as soon as their code is executed; other viruses lie dormant until circumstances cause their code to be executed by the computer. Some viruses are benign or playful in intent and effect ("Happy Birthday, Ludwig!") and some can be quite harmful, erasing data or causing your hard disk to require reformatting. A virus that replicates itself by resending itself as an e-mail attachment or as part of a network message is known as a worm.

Generally, there are three main classes of viruses:

File infectors. Some file infector viruses attach themselves to program files, usually selected .COM or .EXE files. Some can infect any program for which execution is requested, including .SYS, .OVL, .PRG, and .MNU files. When the program is loaded, the virus is loaded as well. Other file infector viruses arrive as wholly-contained programs or scripts sent as an attachment to an e-mail note.

System or boot-record infectors. These viruses infect executable code found in certain system areas on a disk. They attach to the DOS boot sector on diskettes or the Master Boot Record on hard disks. A typical scenario (familiar to the author) is to receive a diskette from an innocent source that contains a boot disk virus. When your operating system is running, files on the diskette can be read without triggering the boot disk virus. However, if you leave the diskette in the drive, and then turn the computer off or reload the operating system, the computer will look first in your A drive, find the diskette with its boot disk virus, load it, and make it temporarily impossible to use your hard disk. (Allow several days for recovery.) This is why you should make sure you have a bootable floppy.

Macro viruses. These are among the most common viruses, and they tend to do the least damage. Macro viruses infect your Microsoft Word application and typically insert unwanted words or phrases.

The best protection against a virus is to know the origin of each program or file you load into your computer or open from your e-mail program. Since this is difficult, you can buy anti-virus software that can screen e-mail attachments and also check all of your files periodically and remove any viruses that are found. From time to time, you may get an e-mail message warning of a new virus. Unless the warning is from a source you recognize, chances are good that the warning is a virus hoax.

The computer virus, of course, gets its name from the biological virus. The word itself comes from a Latin word meaning slimy liquid or poison.

What is hacking?

 J.H. Hamlyn-Harris, Swinburne University of Technology 
 Friday, 05 April 2013

Last week, we woke to news that the largest cyber attack ever was underway in Europe, with reports of global internet speeds falling as a result of an assault on the anti-spamming company Spamhaus.

In recent weeks, the Reserve Bank of Australia has been the target of a cyber attack, as have South Korean banks and broadcasters and BBC Twitter accounts.

The above stories were all reported as "hacking" - a blanket term readily used to encompass a whole range of attacks, from crashing a server to more sophisticated infiltration, such as stealing passwords. But, generally, news stories don't discriminate.

So what are hackers and their methods really like? What follows is something of a glossary, to cut out (or at least bookmark) and keep.

Types of hackersPhreakers: Perhaps the oldest type of computer hackers, Phreakers discover how telephone systems work and use their knowledge to make free phone calls.

In the past, phone phreakers used what we now think of as hacking techniques to access mainframe computers and programmable telephone switches to obtain information, alter records or evade capture.

Famous (and now retired) phreakers include Kevin Mitnick, Kevin Poulsen and Apple founders Steve Jobs and Steve Wozniak.

Crackers: These guys bypass (crack) security controls on proprietary software, DVDs, computer games and Digital Rights Management (DRM)-protected media.

Crackers trade, share and publish game "cracks", patches, serial numbers and keygens (activation key generators). They also embed malware in their cracks and patches forming Trojans to deter outsiders (mostly "script kiddies"; see below) from using their code.

Unsuspecting people who use their cracks more often than not find themselves infected with worms and viruses (explained below). Such infections often bypass anti-virus tools and firewalls, and are probably responsible for most of the malware on teenagers' home computers.

Black Hat Hackers: These are crackers who actively develop malware and intrusion techniques and tools for evil purposes, Black Hats are motivated by profit.

Criminal organisations, foreign governments and spy agencies will pay handsomely for the latest zero-day (not publicly known) exploit.

Journalist Brian Krebs recently reported a bidding war for a Java exploit valued at more than US$5,000.

White Hat Hackers: These are the good guys. White Hats, also known as "ethical hackers" and "pen-testers", are security researchers.

They test systems (often using the same tools as Black Hats, but within the law) by conducting penetration testing and security audits as a service for businesses and organisations that don't want to be hacked.

White Hats report on any vulnerabilities found and what needs to be done to fix them. Both the US and Australian governments have set up competitions to encourage school and university students to take up (White Hat) hacking as a career. (My Swinburne team competed in the pilot version of Australia's Cyber Challenge in 2012 and scored higher than all other Victorian universities.)

Grey Hat Hackers: Grey Hats generally work within the law but may publish vulnerabilities and exploits or sell exploits to unknown buyers without asking too many questions.

They may also report vulnerabilities to software vendors anonymously to avoid prosecution. Unfortunately some vendors object to having their defective code discovered and discourage security research on their products.

Script kiddies: Also known as "skiddies", these are a growing number of amateur Black Hats who cannot develop their own code but can adapt other people's exploits and use hack tools to attack organisations and each other.

Script kiddies find the term offensive and have been known to launch cyber-attacks against people who have denigrated them or their skills.

It is likely that many of the "hackers" associated with online protest group Anonymous are script kiddies.

Cyber-troops, cyber-soldiers: These are state-sponsored military personnel trained in hacking techniques who use malware and hacking techniques to spy, gather intelligence, steal intellectual property and disrupt enemy systems.

Spammers and Phishers: Spammers use programs - spambots - to automatically send email, SMSs, instant messages and tweets to potential buyers of their products.

Phishers use the same technologies (and fake "pharming" sites) to entice victims to click on links (and type in user-names and passwords) and download and install malware. The book Spam Kings recounts the early history of many spammers.

Types of hacks

Now that we know who the bad guys are, let's consider what they do and how their actions are likely to affect people.

Script injection (SQL, JavaScript) attacks: Most websites are connected to databases. With Structured Query Language (SQL) injection, attackers run their own code on these databases, allowing them to change records, delete data and extract private information such as credit card numbers, passwords or password hashes.

JavaScript injection happens through publicly-writable web sites such as Facebook, Twitter and sites with forums and discussion boards. If not properly filtered, an attacker can upload script that extracts private information from people visiting the site.

Scripts can bypass firewalls to extract user credentials, track user activities, install malware and even turn on the web camera and microphone. The simplest way to prevent such attacks is to turn off scripting (in your browser).

The Firefox NoScript plug-in is an easy way to do this.

Password cracking: Simply put, if an attacker can guess your password, he or she can take over your computer. Most computer users are overwhelmed by the number of account names and passwords they have to remember, so they tend to re-use them.

An attacker can use SQL injection to recover passwords or password hashes from a poorly-secured website, and then try the same user-names and passwords to log into high-value sites such as bank accounts.

Websites and email systems that restrict password length are the easiest to attack.

Brute force attacks: These use automated tools to guess the password or re-create the password hash.

The most effective ways of preventing this is to (a) use long passwords, and (b) use different passwords.

DoS/DDoS: (Distributed) Denial of service attacks are generally launched against organisations, whose servers are flooded with "broken" network communications that cause the servers to slow down or even crash.

Companies that rely on online trading will lose a lot of money (and reputation) if this happens, and will often pay the attackers to call off the attack.

Viruses, worms and trojans: These are infection carriers used to distribute malware. Viruses travel by thumb drives, worms travel through the internet, and Trojans are downloaded by unsuspecting users.

Anti-virus software will stop most of this, but not the latest (or zero-day) malware attacks.

Crimeware, hijackers and ransomware: Black Hat hacking has matured into an industry. Hackers can purchase crimeware packs for a few thousand dollars and start up a business distributing malware, accepting payments and laundering money.

Hijackers take over your web browser and redirect you to advertising sites. Ransomware infects your computer and prompts you to call a toll-free number, where you can pay to have your computer remotely "disinfected".

Man-in-the-browser malware, such as Zeus, can intercept your online banking sessions in your browser and phone, draining your account by sending money to the attackers.

Bots and bot-nets: Bots emulate human users. Once a bot has infected your computer, you are "owned". Your computer (now a zombie) is remotely controlled by a bot herder who can use it and hundreds of thousands of other zombies to launch DDoS attacks, crack passwords, send spam and host illegal content.

Protect yourself

We can only minimise the risks, but the risks are well understood. Turn off scripting, maintain your anti-virus, don't read unsolicited emails, use long passwords, use different passwords, don't download programs you didn't go looking for, be sceptical ... and finally: learn about computer security (to find out what else you can do).

There's no need to be paranoid. Just be careful. White Hat hackers are there to help by exposing the risks and testing the systems. Trust them. They're the good guys.

James H. Hamlyn-Harris does not work for, consult to, own shares in or receive funding from any company or organisation that would benefit from this article, and has no relevant affiliations.